SYN 900MHz +15dBm Repeater

This model is adapted for small to medium-sized offices up to 1000m2 in an office environment or up to 2000m2 in very open areas. It is programmable so that the installer can change the center frequency (10 MHz bandwidth). In addition, it is possible to configure a number of other parameters via the touch display. It has a built-in Uplink Sleep Mode or so-called Silent Mode that protects the operator's base stations from noise/load when no one behind the repeater is talking on the phone. That is, the repeater turns off the signal to the operator's base station when there is no traffic behind the repeater. This happens in milliseconds. This is a function that is usually only found in more powerful and significantly more expensive repeaters. Although this is a competent repeater, we have chosen to make it easy to install. The repeater normally runs in a fully automatic mode that tests signal strengths and possible signal leakage between internal and external antennas during startup to set the repeater and alarm if it detects potential signal leakage that could result in looping. The repeater also has automatic shutdown in case of excessive signal leakage or looping. Everything to prevent problems for you and the operators. An LCD display shows signal strength (in), output power, amplification factor both in uplink and downlink as well as center frequencies. Normally, the repeater runs in auto mode. But if you need to manually set gain, do it via the touch display. Proper antenna connectors (N-type) are screwed into the metal chassis to be able to connect even coarse cables.